DTF pressing instructions

DTF IS OFFERED AS A GANG SHEET. YOU NEED TO CUT EACH PRINT OUT OF THE GANG SHEET BEFORE PRESSING. 

Step 1: Pre-press your garment for 3-5 seconds at 300˚F

Step 2: Place your transfer on the garment, press for 7-10 seconds with heavy pressure set on our heat press. 

Step 3: Peel immediately while transfer is still hot.* (can also be peeled cold)

Step 4: Post-press for 5 seconds with the finish of your choice. 

Matte - cover with parchment paper / Gloss - cover with a teflon sheet

 

It is NOT recommended to use an Easy Press, an HTV RONT, etc with our products. These presses do not have heavy pressure options, which is needed for proper pressing results. 

 

*WHILE THIS FILM IS HOT PEEL, IF YOU ARE EXPERIENCING ISSUES PEELING HOT, IT CAN BE PEELED COLD AS WELL.